Ultra-Slim 38mm Case with Oyster Bracelet Set - CAS025

Always felt that mod cases for custom builds are too big / thick?

A common complain amongst modders is that the NH35 does not allow for thin cases.

Well, that changes now.

Clocking in at an ultra thin 6mm, this explorer-style case allows you to use all the usual NH-family movements from the NH34, NH35, NH36, NH37, NH38, NH39, NH70, NH71, NH72.

Yes you read right - despite the thinness, it fits the NH34!

This 316L steel case is just begging for a vintagey boxy pot crystal so we did just that. And you needn't fret about not having that fancy crystal press anymore - because we are supplying these with the crystal installed and inspected by our experts.

Every set comes with the solid-end link bracelet provided - with a milled clasp too.

We've also made sure to include a slim coin-edged screw-down crown for ease of use.

The built-in reheat means there is no need for expense on a chapter ring.

Add a stem, dial, hands, and movement and you're good to go!

This case is machined out of 316L steel with brushed front lugs and polished sides.

Lug width comes in at 20mm to fit a wide variety of straps.

This case set is rated to 100m when used with the parts supplied by us, and with gaskets properly lubricated and installed. 

Facts and Figures:

Case Diameter: 38mm
Lug to Lug: 45.5mm
Thickness: 6mm (11.5mm total thickness with boxy crystal and casebook installed)
Lug Width: 20mm

Comes with:
Stainless Steel Case Back
Bezel and Crystal (installed, screw-down system)
Case Back and Gasket
Solid Endlink Bracelet with Milled Clasp
20mm Spring Bars